Network Analyzer - R3765C: Max frequency 4.8GHz with 2-port S-parameter test set, Call for further specifications on the R3765C.
300Khz - 3.8Ghz, 3 Port Vector Network Analyzer - 300Khz - 3.8Ghz, 1Hz resolution, +10dBm to -10dBm internal source output power. Measurement formats, amplitude, phase, groupdelay, VSER, Complex... [more]
Network Analyzer - R3767CH: 40MHz to 8GHz frequency range, +10dBm to -15dBm output level range, 0.01dB output resolution, 10Hz min. resolution bandwidth, 0.10ms/point sweep speed with normalized... [more]
50MHz TO 40GHz Frequency Range, 1Hz Frequency Resolution, -5dBm TO -75dBm Power Range, 80dB TO 93dB System Dynamic Range, 2.4mm (Male) Connector, Built-In S-Parameter Test Set.
Detector Adapater - 11664C: SMA (male) connector, Characteristics of the 11664C are determined by external detector used.
RF Detector - The 11664E is for use with 8757, 8756, or 8755 in AC detection mode only; 10MHz to 26.5GHz frequency range, +16dBM to -60dBm dynamic range, 3.5mm (male) connector, Call for further specifications on the 11664E.
Phase Noise Interface - The 11848A is an integral component in 3048A system, contains the phase detectors and phase-lock loop circuitry, with 3561A dynamic signal analyzer measurement software, A variety... [more]
S-Parameter Test Set - 35677A: For 50ohm systems; 100kHz to 200MHz frequency range, Greater than 40dB directivity, +25dB max. operating level, Connectors: 50ohm Type-N (female) input ports and output... [more]
S-Parameter Test Set - 35677B: For 75ohm systems; 100kHz to 200MHz frequency range, Greater than 40dB directivity, +25dB max. operating level, Connectors: 50ohm Type-N (female) input ports and output... [more]
Gain-Phase Meter - 3575A: Broadband two channel analyzer typically used to measure transfer functions such as amplifier gain / loss or the frequency response of filters; 1Hz to 13MHz frequency range,... [more]
Password:
Home 
Analyzers 
